1400℃ Vacuum Atmosphere Tube Furnace CVD System

1400℃ Vacuum Atmosphere Tube Furnace CVD System
Provides an experimental environment with vacuum, controlled atmosphere and high temperature. This CVD growth system is suitable for CVD processes, such as silicon carbide coating, ceramic substrate conductivity testing, controlled growth of ZnO nanostructures, and MLCC atmosphere sintering experiments.
  • ModelCVD-LTF14P/ CVD-LTF14T Series
  • BrandLABOAO
  • PortAny port in China
  • PackagePlywood case package
Payment We also supports L/C、D/A、D/P、Western Union、MoneyGram、Discover payments for offline orders.


DESCRIPTION

Provides an experimental environment with vacuum, controlled atmosphere and high temperature.

This CVD growth system is suitable for CVD processes, such as silicon carbide coating, ceramic substrate conductivity testing, controlled growth of ZnO nanostructures, and MLCC atmosphere sintering experiments.

FEATURES

1. The furnace is made of polycrystalline mullite fiber vacuum adsorption, the temperature field is uniform and energy saving is more than 50%

2. Air diversion and heat insulation technology ensures the service life and constant temperature effect of each component in the box

3. Start the electric furnace, and the exhaust fan will run automatically at the same time. After the test, the exhaust fan will continue to run until the temperature of the furnace body is lower than 60 °C, and the exhaust fan will stop automatically, which effectively protects the surface of the furnace body.

4. Automatic power-off, over-temperature protection function, leakage protection function to ensure the safety of use

5. The circuit adopts continuous heating output mode, dual-circuit power supply, and separate wiring of strong and weak current improves the stability of the system

6. The heating module adopts DC signal to adjust the output power, which avoids the interference of induced electricity to the control signal.

7. Automatic compensation for the temperature control effect caused by temperature or aging on the resistance value change of the silicon carbide rod, avoiding the inaccuracy and danger of artificial adjustment

8. Adopt digital flow display instrument, cooperate with mass flow controller, collect data and control flow. It has the characteristics of good repeatability, fast response speed, stability and reliability. (Gas Mass Flow Control System)

9. Automatic control and manual control switching function, the automatic control mode can automatically turn on/off the vacuum pump through the set value to keep the container within a certain vacuum pressure range. Manual control mode uses the user to directly operate the vacuum pump via the vacuum pump on/off button. to meet the needs of different experiments. (Medium vacuum control system)

10 Solenoid valve slow start technology, so that the solenoid valve is opened 10 seconds after the vacuum pump is turned on, so that the system pressure in the furnace tube is kept accurate, and it also ensures that the exhaust gas will not return to the furnace tube system to affect the experimental effect (medium vacuum control system)

SPECIFICATIONS

Model

CVD-LTF14P40

CVD-LTF14P50

CVD-LTF14P60

CVD-LTF14P80

CVD-LTF14T40

CVD-LTF14T50

CVD-LTF14T60

CVD-LTF14T80

Operating   temperature range

300~1400

Temperature   resolution

1

Temperature   control

± 1

Heating rate

0~20/min

Heating zone   length

200mm

400mm

Length of   constant temperature zone

70mm

140mm

degree of   vacuum

-0.1MPa

Empty furnace   heating time

≤15min

Heating rate   when configuring furnace tube

Below 500 ≤5/min500-1000≤10/min1000-1200≤5/min1000-1400≤2/min

Exterior

Cold-rolled   steel sheet with chemical-resistant coating on the surface

Furnace body

Polycrystalline   Mullite Fiber

Furnace size

360*350*350mm

560*350*350mm

Furnace tube

Corundum   Tube

Furnace tube   size

Φ40/34*1000

Φ50/44*1000

Φ60/50*1000

Φ80/70*1000

Heater

Silicon   carbide rod

Heating   power

3KW

5KW

Thermal   insulation layer

Double-layer   forced air diversion

Open way

No

Controller

P: Imported   program temperature control digital display; T: 7-inch color touch screen   program temperature control

Control   method

Using   microcomputer PID control

How to set

P: Touch   five buttons for action, digital display setting; T: Finger touch and tap to   set

Display   method

P:   Double-line LED digital display; T: Color LCD display

Timing

0~999.9   hours

Run function

Fixed value   operation, program operation

Program mode

P: Program   running, 4 curves, a total of 40 steps; T: 50 steps can call the stored   program

Sensor

Type S   thermocouple

Auxiliary   function

P:   Correction function; T: Correction function, real-time curve recording, U   disk data export

Safety equipment

Overcurrent   leakage protection switch

Number of   air paths

3 channels   (the number of air channels can be selected according to specific needs)

Flow range

0-0500sccm   (standard ml/min, optional) nitrogen standard

±1%F.S

Precision

Response   time

≤4s

Operating   temperature (flow meter)

5-45

Work   pressure

Inlet   pressure 0.05-0.3MPa (gauge pressure)

System   connection

Adopt KF   quick connection bellows, high vacuum manual flapper valve and digital display   vacuum measuring instrument

System   vacuum range

10-100Pa

Vacuum pump

The   theoretical ultimate vacuum degree of the two-stage mechanical pump is 3x10-1Pa,   the pumping rate is 4L/s, the air outlet is equipped with an oil filter, the   rated voltage is 200V, and the power is 0.55Kw

CVD system   configuration

1400 degree   vacuum tube furnace Multi-channel mass flow control system Vacuum system


WHY CHOOSE US

  1. Factory direct sales with competitive price.
  2. Premium quality with CE & ISO certification.
  3. Strong product OEM & ODM customization capability.
  4. Promise production & on-time delivery.
  5. Perfect after-sales service, free product accessories.
  6. 15 years of experience in R&D and production of vacuum atmosphere tube furnace machine.
laboao certification

OUR FACTORY

We have a standard production workshop and a complete production team. They always produce a serious and responsible attitude to produce each product. Our R&D team is made up of multi-aspects professional engineers such as design engineer,technology specialist ,qualified specialist and process control manager, etc. Our qualified specialists strictly realize the process comprehensive supervision based on our quality process control system, which contains products design, research and development, test, production, quality inspection and packaging.

laboao factory

CUSTOMER CASES

Our laboratory instruments and equipment are used in many scientific laboratories, scientific research institutions, universities, hospitals, centers for disease control and other institutions, and are combined with many well-known biopharmaceuticals, new energy, electronics companies, food processing, environmental protection, etc. Enterprise cooperation, our stable and reliable products are exported to more than 120 countries around the world, and have been highly recognized by them, believe LABOAO, we grow together!

laboao customer cases

Inquiry this product