Laboratory Benchtop Small Spray Dryer

Laboratory Benchtop Small Spray Dryer Laboratory Benchtop Small Spray Dryer
Laboratory desktop type small spray dryer is mainly suitable for universities, research institutes and food, pharmaceutical and chemical enterprises laboratory production of trace particles powder, for all solutions such as emulsions, suspensions have a wide range of applicability.
  • ModelLSP-2000B/ LSP-2000BS
  • BrandLABOAO
  • PortAny port in China
  • PackagePlywood case package
Payment We also supports L/C、D/A、D/P、Western Union、MoneyGram、Discover payments for offline orders.

DESCRIPTION

It is suitable for drying heat-sensitive materials such as biological products, biological pesticides, enzyme preparations, etc. Because the sprayed materials are only subjected to high temperature and instantaneous heat when sprayed into mist, so these active materials maintain their active ingredients after drying.

FEATURES

1. The use of self-designed concentric coaxial atomizer, nozzle aperture can be customized. 

2. The use of wear-resistant and corrosion-resistant 16# silicone tube, can meet the needs of most heat-sensitive materials conveying. 

3. The feeding device is an embedded peristaltic pump, precise speed control, one-way rotation is safer. 

4, Supporting good light transmission, and acid and alkali resistant high borosilicate glass drying components. 

5. The clamps of fixed components are made of high quality aluminum alloy, tight and durable without dead ends. 

6. The cyclone separator and the bag type dust removal device can be switched to use, which can sieve and collect materials of different particle sizes. 

7. The use of imported oil-free air compressor from Taiwan, low pollution, low noise, can work continuously. 

8. Adopt high precision PID temperature control technology, temperature control precision range 1℃, electric heating heat source is stable and more environmental friendly. 

9. intelligent man-machine interactive interface, simple operation, support Chinese and English switching 

10. the finished dry powder after drying, its granularity is more uniform, more than 95% of the dry powder is in the same granularity range. 

11. For viscous materials, there is a nozzle cleaner (through-needle), which will be cleared automatically when the nozzle is blocked, and the frequency of through-needle can be adjusted automatically. 

12. Stainless steel drying chamber can do tower wall blowing. 

13. Accept customization (such as fully equipped with imported accessories, the appearance of sandblasting, according to the laboratory environment design models, etc.)

SPECIFICATIONS

Model

LSP-2000B

LSP-2000BS

Water   evaporation

1000mL-2000 mL/h

Minimum feed   volume

50ml

Liquid   delivery pump

4-link rotor   pump (feed tube: imported silicone peristaltic tube) (6-link rotor pump is   optional)

Fogging   method

Refined   two-fluid atomization nozzle (one air and one liquid) (optional refined   plastic two-fluid atomization nozzle)

Nozzle   diameter

(Spraying   System) optional 07/1.0/1.5/2.0/2.2mm, with the machine standard   configuration 1.0mm (optional silicon carbide material, wear resistance is   about 10 times the stainless steel)

Average   drying time

1.01.5S

Atomization tower

High borosilicate glass

SUS304 stainless steel

cyclone separator

High borosilicate glass

SUS304 stainless steel

Receiving bottle

High borosilicate glass

SUS304 stainless steel

Temperature   Setting Range

30-300   PID automatic control; (temperature can be set)

Temperature   adjustment accuracy

Inlet   temperature ±1

Fans

Single-phase   low-noise fan, fan flow; 3.2m³/min, wind pressure; 19KPa9 (Taiwan imported   fan, silent and powerful)

Temperature   Sensor

PT-100 Thermocouple

Spray   adjustment range

0-0.8 MPa   (0.2 MPa recommended)

Spray   pressure intake volume

106L/min;   exhaust volume; 36L/min; input power 580W

Air   compressor for spraying

Optional

Electric   heater power

3.5KW

Rated   voltage

220V/50HZ

Inlet air treatment

Fiber cotton   filter

Liquid   delivery pump flow range adjustment

0-26ml/min

Electrical   box cooling

Brushless DC   motor fan fan heat

Air   connection diameter for spraying

6mm outer   diameter air hose

Function   Protection

Fan does not   start, heater does not start, air compressor does not start, peristaltic pump   does not start

Dimension(W×D×H)mm

1090×600×890

Equipment   control mode

Touch Screen

Whole   machine material/weight

304/105KG

WHY CHOOSE US

  1. Factory direct sales with competitive price.
  2. Premium quality with CE & ISO certification.
  3. Strong product OEM & ODM customization capability.
  4. Promise production & on-time delivery.
  5. Perfect after-sales service, free product accessories.
  6. 15 years of experience in R&D and production of small spray dryer machine.
laboao certification

OUR FACTORY

We have a standard production workshop and a complete production team. They always produce a serious and responsible attitude to produce each product. Our R&D team is made up of multi-aspects professional engineers such as design engineer,technology specialist ,qualified specialist and process control manager, etc. Our qualified specialists strictly realize the process comprehensive supervision based on our quality process control system, which contains products design, research and development, test, production, quality inspection and packaging.

laboao factory

CUSTOMER CASES

Our laboratory instruments and equipment are used in many scientific laboratories, scientific research institutions, universities, hospitals, centers for disease control and other institutions, and are combined with many well-known biopharmaceuticals, new energy, electronics companies, food processing, environmental protection, etc. Enterprise cooperation, our stable and reliable products are exported to more than 120 countries around the world, and have been highly recognized by them, believe LABOAO, we grow together!

laboao customer cases

Inquiry this product