How to keep the high speed centrifuge in a better state? Be sure to pay attention to the manual of the high speed centrifuge. You must follow the recommended method. Make sure that the ratio of water and air to the high speed centrifuge is correct. Always use approved brand oils for lubrication and must check for regular oil usage. The maintenance and maintenance of high speed centrifuges is very important and must be taken seriously. Do all the preparatory work to maintain normal use, and ensure that the high speed centrifuge is running according to the recommended design parameters, so that high speed centrifuges achieve good working efficiency.
In the monitoring of high speed centrifuges, the vibration process of the equipment and the temperature of the bearings are monitored continuously. Always check the equipment to see if there are any leaks and any abnormal sounds, and deal with them as soon as they are found. For the operation area, always keep it clean. Remember not to put the parts directly on the ground. In normal times, you should start to develop a good habit of operation, which will avoid mistakes in improper operation.
Keeping the high speed centrifuge in good condition, from routine maintenance and correct operation, must be carried out according to the recommended service interval. Strictly follow the machine preventive maintenance instructions. Do not ignore some details. Obey the matters that you pay attention to and stick to it. Thorough cleaning of the parts must be carried out before reinstalling the high speed centrifuge.
The parts that are actually supplied by the original equipment manufacturer for service and maintenance must be stored in a clean, safe and dry place. Strict use of genuine accessories must be used to achieve the promised performance and reliability, and to ensure the longevity of the high speed centrifuge. In the inventory of critical spare parts, such as oil and medium repair and overhaul kits, be sure to follow the storage regulations for the preservation of spare parts to avoid damage or corrosion of spare parts.
In the use of high speed centrifuges, we must pay attention to its operating principle. To use it safely, we must start from routine maintenance and correct operation. In the use of high speed centrifuges, we must adhere to the matters that must be adhered to. Can improve the efficiency of the machine. In particular, it is necessary to use it properly according to the characteristics of the high speed centrifuge to achieve good running ability.
In daily life, if the high speed centrifuge can be operated stably, the separation efficiency of the high speed centrifuge will be ensured, and the safety of the machine operation will be greatly improved. In order to ensure the stability of high speed centrifuges, we must pay attention to all aspects of a system. So, in our daily life, how can we ensure the stable operation of high speed centrifuges?
First, we must strengthen the management of the equipment, that is, the cleaning of the high speed centrifuge, especially the drum, so as to reduce the dirt on the drum, thus avoiding the high speed centrifuge due to uneven force. Vibration. Therefore, be sure to wash repeatedly with clean water when cleaning the drum, this will ensure that the drum is rinsed clean.
Secondly, it is necessary to pay attention to the regular cleaning of the flocculating agent storage device to reduce the adhesion of the sludge to the drum of the centrifuge, so that the centrifugal pump can ensure that the centrifugal force of the high speed centrifuge is uniform. Under normal conditions, high speed centrifuges will play a greater role.
Third, when performing the initial installation of a high speed centrifuge, the vibration of the high speed centrifuge should be considered. The high speed centrifuge uses a firm steel structure as the base to ensure the height of the high speed centrifuge pulley and differential. The difference is less than 5 mm, and then through the connection with the pipeline, the vibration amplitude of the machine is dynamically determined according to the load.
Fourth, it is necessary to reduce the load of impurities in the high speed centrifuge material and reduce the solid content of the material from the material, because the material is fast when it is thrown out. If there are more large particles of impurities, it may lead to various parts of the high speed centrifuge. Accelerated wear and tear, high speed centrifuge unstable operation is reasonable.
However, in addition to the above points, the level of the operator of the high speed centrifuge should also be trained. In fact, the operation of the high speed centrifuge is a system action, each step must be accurate, if there is an emergency, there must be Coping measures, in order to avoid accidents to a large extent.
The above points are the items that need to be paid attention to when running a high speed centrifuge in daily life. As long as the centrifugal force is uniform when the drum is rotated, the smooth running of the high speed centrifuge can be ensured.